Détails sur le produit:
|
Longueur d'onde: | 2000Nm | Intensité de rayonnement: | 450mW |
---|---|---|---|
Angle de demi-intensité: | 15° | Temps de montée/descente: | 25ns |
Tension de fonctionnement: | 5.7V | Plage de température de fonctionnement: | -40 ℃ à 80 ℃ |
Conditionnement: | en forme de disque | Catégorie: | Capteur de gaz |
Mettre en évidence: | compact black body light source,gas sensor reflector light,YJJ EMIRS200 light source |
Product Description:
YJJ 600.451 EMIRS200_AT01T_BR090 Compact Black Body Light Source With Reflector
Features:
Technical features
Has the characteristic of blackbody radiation (2 to 14 μm)
High emissivity
Fast electro-mechanical modulation function (no need for a chopping wheel)
Extremely high modulation depth
High conversion efficiency of electrical energy to optical radiation
Low power consumption . Long service life
Sturdy MEMS design (certified by IEC 60721-3-7 Class 7M3 requirements, but excluding low-pass filters made of calcium fluoride and barium fluoride)
Measurement principle . Non-dispersive infrared spectroscopy (NDIR)
Photoacoustic spectroscopy (PAS)
Attenuated total reflection (ATR) optical spectroscopy
Target gas
CO, CO, VOC, NO, NH, SO, SF, hydrocarbons, humidity, anesthetic gases, refrigerants, breath alcohol gas, etc. Application
·Medical
End-tidal carbon dioxide graph, anesthetic gas detection, respiratory function monitoring, lung function monitoring, respiratory alcohol gas detection, blood gas analysis, industrial combustible and toxic gas detection, refrigerant monitoring, flame detection, fruit ripeness monitoring, SF. monitoring, semiconductor process. . Car
CO, vehicle refrigerant monitoring, alcohol detection and alcohol lock, interior air quality monitoring . Environment
Heating, Ventilation and Air Conditioning (HVAC), indoor air quality monitoring, and volatile organic compound (WOC) monitoring
Technical advantages:
Properties of blackbody radiation (2 to 14 μm)
High emissivity
Fast electrical modulation function (no chopper wheel required)
A very high level of regulation
Radiation conversion efficiency is high
Low power consumption
Long service life
Robust MEMS designs (except for those with barium fluoride and calcium fluoride filters, all are IEC 607213-7M3 certified
EMIRS200 is encapsulated in T039 - aerated on top
Product number
603.050
EMIRS200_AT01T
base
T039
combination
There is no
Filter plate
There are no filters
Operating temperature ℃
450℃ at 450 MW
irradiance
0.95
Adjustment system %
80% at 10Hz,50% at 50Hz
Service life (years)
More than 10 years, recommended use in 450mW
Cold resistance (Ω)
45Ohm (35-55Ohm) *
Thermal resistance (Ω)
72Ohm (54-89Ohm)*
Voltage (V)
5.2V at 450mW
Current (I)
86mA at 450mW
The resistance value is initially tested, please note that it will vary over the life of the product
Specifications:
Preheating time | ≤30 minutes |
Response time | ≤90 seconds |
The range of | 0 ~ 500 PPM |
Resolution | ≤0.01 PPM |
Personne à contacter: Miss. Xu
Téléphone: 86+13352990255